View source for PEDRIVER

'''PEDRIVER''', or the '''port emulator driver''', is a piece of software that implements the [[NISCA]] protocol and establishes and controls channels for communication between local and remote LAN ports.

PEDRIVER implements a packet delivery service (at the TR level of the [[NISCA]] protocol) that guarantees the sequential delivery of messages. The messages carried by a particular virtual circuit can be sent over any of the channels connecting two nodes. The choice of channel is determined by the sender (PEDRIVER) of the message. Because a node sending a message can choose any channel, PEDRIVER, as a receiver, must be prepared to receive messages over any channel.

At any point in time, the TR level uses single "preferred channel" to carry the traffic for a particular virtual circuit.

Starting with OpenVMS Version 8.3, the PEDRIVER also supports the following features:

* Data compression
Data compression can be used to reduce the time to transfer data between two OpenVMS nodes when the LAN speed between them is limiting the data transfer rate, and there is idle CPU capacity available. For example, it may be used to reduce [[Shadow Set|shadow copy]] times, or improve [[MSCP]] serving performance between Disaster Tolerant cluster sites connected by relatively low-speed links, such as E3 or DS3, FDDI, or 100Mb Ethernet. PEdriver data compression can be enabled by using [[SCACP]], [[Availability Manager]], or the [[NISCS_PORT_SERV]] parameter.
* Multi-gigabit line speed and long distance performance scaling
The number of packets in flight between nodes needs to increase proportionally to both the speed of LAN links and the inter-node distance. Historically, PEdriver had fixed transmit and receive windows (buffering capacity) of 31 outstanding packets. Beginning with OpenVMS Version 8.3, PEdriver now automatically selects transmit and receive window sizes (sometimes called pipe quota by other network protocols) based on the speed of the current set of local and remote LAN adapters being used for cluster communications between nodes. Additionally, [[SCACP]] and [[Availability Manager]] now provide management override of the automatically-selected window sizes.

=See also=
* [https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04619857 Guidelines for OpenVMS Cluster Configurations]
* [https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04623183 OpenVMS Cluster Systems]