Difference between revisions of "VMS-Specific Python Modules"

From VSI OpenVMS Wiki
Jump to: navigation, search
(vms.ile3)
m (RMS)
 
(97 intermediate revisions by 3 users not shown)
Line 1: Line 1:
VMS specific Python modules.
 
 
== vms.decc ==
 
== vms.decc ==
Wraps the '''HP C Run-Time Library''' functions.
+
<br>Wraps the '''C Run-Time Library for OpenVMS Systems''' functions.<br>
 
+
----
 
=== dlopen_test(name:str)->int ===
 
=== dlopen_test(name:str)->int ===
Tries to open a shared image.
+
Checks if a shared image can be opened and loaded into memory.
==== parameters ====
+
;parameters
* <code>name:str</code> path to the shared image
+
: <code>name:str</code>: path to the shared image
==== returns ====
+
;returns
* <code>1</code> if the shared image exists and can be opened by dlopen()
+
: <code>1</code>: if the shared image exists and can be opened by dlopen()
* <code>0</code> otherwise
+
: <code>0</code>: otherwise
 
+
----
 
=== fix_time(vms_time:int)->int ===
 
=== fix_time(vms_time:int)->int ===
Converts VMS time to the Unix time.
+
Converts the VMS time to the Unix time stamp.
==== parameters ====
+
;parameters
* <code>vms_time:int</code> VMS system time
+
: <code>vms_time:int</code>: VMS system time
==== returns ====
+
;returns
Time in Unix format (seconds that have elapsed since 1970.01.01)
+
:Time in the Unix format (number of seconds since 01/01/1970)
 
+
----
 
=== from_vms(vms_path:str, wild_flag:int)->list ===
 
=== from_vms(vms_path:str, wild_flag:int)->list ===
Converts VMS path to a list of Unix paths.
+
Converts the VMS path to a list of Unix paths.
==== parameters ====
+
;parameters
* <code>vms_path:str</code> path in VMS format (supports wildcards)
+
: <code>vms_path:str</code>: path in the VMS format (supports wildcards)
* <code>wild_flag:int</code> If set to <code>0</code>, wildcards found in the <code>vms_path</code> are not expanded  
+
: <code>wild_flag:int</code>: If set to <code>0</code>, the wildcards found in <code>vms_path</code> are not expanded  
==== returns ====
+
;returns
List of paths in Unix format
+
:List of paths in the Unix notation
 
+
----
 
=== getenv(name:str, def_value:str)->str ===
 
=== getenv(name:str, def_value:str)->str ===
Gets the specified environment variable value. See getenv() description in the '''HP C Run-Time Library Reference Manual for OpenVMS Systems''' documentation.
+
Gets the specified environment variable value. See getenv() description in the '''VSI C Run-Time Library Reference Manual for OpenVMS Systems'''.
==== parameters ====
+
;parameters
* <code>name:str</code> name of the environment variable
+
: <code>name:str</code>: name of the environment variable
* <code>def_value:str</code> default value
+
: <code>def_value:str</code>: default value
==== returns ====
+
;returns
Environment variable value
+
:Environment variable value
 
+
----
 
=== sleep(seconds:int)->int ===
 
=== sleep(seconds:int)->int ===
 
Suspends execution of the current process or thread for the specified number of seconds.
 
Suspends execution of the current process or thread for the specified number of seconds.
==== parameters ====
+
;parameters
* <code>seconds:int</code> seconds to sleep
+
: <code>seconds:int</code>: seconds to sleep
==== returns ====
+
;returns
The number of seconds left to the end of the sleep period if sleep is interrupted.
+
:The number of seconds left before the sleep timer expires if sleep is interrupted. <code>0</code> if the process slept for the specified number of seconds
<code>0</code> if the process slept for the specified number of seconds.
+
----
 
 
 
=== sysconf(name:int)->int ===
 
=== sysconf(name:int)->int ===
 
Provides a method for determining the current value of a configurable system limit or whether optional features are supported.
 
Provides a method for determining the current value of a configurable system limit or whether optional features are supported.
==== parameters ====
+
;parameters
* <code>name:int</code> system variable to be queried
+
: <code>name:int</code>: system variable to be queried
==== returns ====
+
;returns
Requested value
+
:Requested value
 
+
----
 
=== to_vms(unix_path:str, allow_wild:int, no_directory:int)->list ===
 
=== to_vms(unix_path:str, allow_wild:int, no_directory:int)->list ===
Converts UNIX style file specifications to OpenVMS file specifications.
+
Converts the UNIX style file specifications to the OpenVMS file specifications.
==== parameters ====
+
;parameters
* <code>unix_path:str</code> file name in UNIX style file specification format
+
: <code>unix_path:str</code>: file name following the Unix file naming conventions
* <code>allow_wild:int</code> If set to <code>0</code>, wildcards found in <code>unix_path</code> are not expanded
+
: <code>allow_wild:int</code>: If set to <code>0</code>, the wildcards found in <code>unix_path</code> are not expanded
* <code>no_directory:int</code> An integer that has one of the following values:
+
: <code>no_directory:int</code> An integer that has one of the following values:
** 0 - Directory allowed
+
:* 0 - Directory allowed
** 1 - Prevent expansion of the string as a directory name
+
:* 1 - Prevent expansion of the string as a directory name
** 2 - Force expansion of the string as a directory name
+
:* 2 - Force expansion of the string as a directory name
==== returns ====
+
;returns
List of paths in OpenVMS style
+
List of OpenVMS style pathnames
 
+
----
 
=== unixtime(vms_time:int)->int ===
 
=== unixtime(vms_time:int)->int ===
Converts OpenVMS system time to the Unix local time.
+
Converts the OpenVMS system time to the Unix local time.
==== parameters ====
+
;parameters
* <code>vms_time:int</code> OpenVMS system time
+
: <code>vms_time:int</code> OpenVMS system time
==== returns ====
+
;returns
Unix time
+
:Unix time
 
+
----
 
=== vmstime(unix_time:int)->int ===
 
=== vmstime(unix_time:int)->int ===
 
Converts Unix time to the OpenVMS system time.
 
Converts Unix time to the OpenVMS system time.
==== parameters ====
+
;parameters
* <code>unix_time:int</code> Unix time
+
: <code>unix_time:int</code>: Unix time
==== returns ====
+
;returns
 
OpenVMS system time
 
OpenVMS system time
 +
----
 +
=== get_symbol(name:str)->list ===
 +
Requests the calling process’s command language interpreter (CLI) to return the value of a CLI symbol as a string.
 +
;parameters
 +
: <code>name:str</code>: Name of the symbol
 +
;returns
 +
:The list:
 +
:*<code>int</code>: status code of the operation
 +
:*<code>str</code>: value of the returned symbol
 +
----
 +
=== fopen(path:str, mode:str, ...)->fp:object ===
 +
Opens a file.
 +
;parameters
 +
: <code>path:str</code>: A character string containing a valid file specification
 +
: <code>mode:str</code>: The access mode indicator
 +
: <code>...:str</code>: Optional file attribute arguments
 +
;returns
 +
:*<code>fp:object</code>: File pointer
 +
----
 +
=== fclose(fp:object)->status:int ===
 +
Closes a file.
 +
;parameters
 +
: <code>fp:object</code>: A pointer to the file to be closed
 +
;returns
 +
:*<code>status:int</code>: status code of the operation
 +
----
 +
=== fileno(fp:object)->fd:int ===
 +
Returns the file descriptor associated with the specified file pointer.
 +
;parameters
 +
: <code>fp:object</code>: A pointer to the file
 +
;returns
 +
:*<code>fd:int</code>: Integer file descriptor
 +
----
 +
=== write(fd:int, data:bytes)->nbytes:int ===
 +
Writes bytes to a file.
 +
;parameters
 +
: <code>fd:int</code>: Integer file descriptor
 +
: <code>data:bytes</code>: Bytes to write
 +
;returns
 +
:*<code>nbytes:int</code>: The number of bytes written
 +
----
 +
 +
=== fgets(fp:object, maxchars:int)->line:str ===
 +
Reads a line from the specified file, up to one less than the specified maximum
 +
number of characters or up to and including the newline character, whichever
 +
comes first.
 +
;parameters
 +
: <code>fp:object</code>: A pointer to the file
 +
: <code>maxchars:int</code>: The maximum number of characters to fetch
 +
;returns
 +
:*<code>line:str</code>: The fetched line
 +
----
 +
 +
=== feof(fp:object)->status:int ===
 +
Tests a file to see if the end-of-file has been reached.
 +
;parameters
 +
: <code>fp:object</code>: A pointer to the file
 +
;returns
 +
:*<code>status:int</code>: Nonzero integer indicates that the end-of-file has been reached
 +
----
 +
=== ferror(fp:object)->status:int ===
 +
Returns a nonzero integer if an error occurred while reading or writing a file.
 +
;parameters
 +
: <code>fp:object</code>: A pointer to the file
 +
;returns
 +
:*<code>status:int</code>: Nonzero integer indicates that an error has occurred
 +
----
  
 
== vms.ile3 ==
 
== vms.ile3 ==
Provides functions for working with the list.
+
<br>Provides functions to work with item lists.<br>
 
+
----
 
=== new()->object ===
 
=== new()->object ===
Creates empty item list.
+
Creates an empty item list.
==== parameters ====
+
;parameters
<code>None</code>
+
: <code>None</code>
==== returns ====
+
;returns
New empty item list
+
:New empty item list
 
+
----
 
=== delete(il:object)->None ===
 
=== delete(il:object)->None ===
Deletes item list.
+
Deletes the item list.
==== parameters ====
+
;parameters
* <code>il:object</code> item list to be removed
+
: <code>il:object</code>: item list to be removed
==== returns ====
+
;returns
OpenVMS system time
+
: <code>None</code>
 
+
----
 
=== size(il:object)->int ===
 
=== size(il:object)->int ===
Gets size of the item list.
+
Gets the size of the item list.
==== parameters ====
+
;parameters
* <code>il:object</code> item list
+
: <code>il:object</code>: item list
==== returns ====
+
;returns
The size of the specified item list
+
:The size of the specified item list
 
+
----
 
=== addint(il:object, item:int, item_type:int, item_value:int)->None ===
 
=== addint(il:object, item:int, item_type:int, item_value:int)->None ===
 
Adds a new integer to the item list.
 
Adds a new integer to the item list.
==== parameters ====
+
;parameters
* <code>il:object</code> item list
+
: <code>il:object</code>: item list
* <code>item:int</code> item to add
+
: <code>item:int</code>: item to add
* <code>item_type:int</code> type of the item. See '''vms.dscdef'''
+
: <code>item_type:int</code>: type of the item. See '''vms.dscdef'''
* <code>item_value:int</code> value of the item
+
: <code>item_value:int</code>: value of the item
==== returns ====
+
;returns
<code>None</code>
+
: <code>None</code>
 
+
----
 
=== getint(il:object, index:int)->int ===
 
=== getint(il:object, index:int)->int ===
Gets the integer at the specified index in the list.
+
Gets the integer at the specified index in the item list.
==== parameters ====
+
;parameters
* <code>il:object</code> item list
+
: <code>il:object</code>: item list
* <code>index:int</code> index of the item to get
+
: <code>index:int</code>: index of the item to get
==== returns ====
+
;returns
Integer value
+
:Integer value
 
+
----
 
=== gethex(il:object, index:int)->str ===
 
=== gethex(il:object, index:int)->str ===
 
Gets the integer at the specified index in the item list and returns it as a hexadecimal string.
 
Gets the integer at the specified index in the item list and returns it as a hexadecimal string.
==== parameters ====
+
;parameters
* <code>il:object</code> item list
+
: <code>il:object</code>: item list
* <code>index:int</code> index of the item to get
+
: <code>index:int</code>: index of the item to get
==== returns ====
+
;returns
Hexadecimal string
+
:Hexadecimal string
 
+
----
 
=== addstr(il:object, item:int, item_value:str, item_length:int)->None ===
 
=== addstr(il:object, item:int, item_value:str, item_length:int)->None ===
Adds the specified string to the item list. If the <code>item_value</code> is not <code>None</code>, the <code>item_length</code> is ignored and the length of the buffer will be the same as the length of the <code>item_value</code>.
+
Adds the specified string to the item list. If <code>item_value</code> is not <code>None</code>, <code>item_length</code> is ignored and the length of the buffer will be the same as the length of <code>item_value</code>.
==== parameters ====
+
;parameters
* <code>il:object</code> item list
+
: <code>il:object</code>: item list
* <code>item:int</code> item to add
+
: <code>item:int</code>: item to add
* <code>item_value:str</code> value to add (or <code>None</code>)
+
: <code>item_value:str</code>: value to add (or <code>None</code>)
* <code>item_length:int</code> length of the buffer if the <code>item_value</code> is <code>None</code>
+
: <code>item_length:int</code>: length of the buffer if <code>item_value</code> is <code>None</code>
==== returns ====
+
;returns
<code>None</code>
+
: <code>None</code>
 
+
----
 
=== addstrd(il:object, item:int, item_value:str, item_length:int)->None ===
 
=== addstrd(il:object, item:int, item_value:str, item_length:int)->None ===
Adds the specified space-expanded string to the item list. The first byte of the buffer is the length of the string. If the <code>item_value</code> is longer than the <code>item_length</code>, it will be truncated.
+
Adds the specified space-expanded string to the item list. The first byte of the buffer is the length of the string. If <code>item_value</code> is longer than <code>item_length</code>, it will be truncated.
==== parameters ====
+
;parameters
* <code>il:object</code> item list
+
: <code>il:object</code>: item list
* <code>item:int</code> item to add
+
: <code>item:int</code>: item to add
* <code>item_value:str</code> value to add
+
: <code>item_value:str</code>: value to add
* <code>item_length:int</code> length of the buffer (the resulting string length is one byte less)
+
: <code>item_length:int</code>: length of the buffer (the resulting string length is one byte less)
==== returns ====
+
;returns
<code>None</code>
+
: <code>None</code>
 
+
----
 
=== addstrn(il:object, item:int, item_value:str, item_length:int)->None ===
 
=== addstrn(il:object, item:int, item_value:str, item_length:int)->None ===
Adds the specified space-expanded string to the item list. If the <code>item_value</code> is longer than the <code>item_length</code>, it will be truncated.
+
Adds the specified space-expanded string to the item list. If <code>item_value</code> is longer than <code>item_length</code>, it will be truncated.
==== parameters ====
+
;parameters
* <code>il:object</code> item list
+
: <code>il:object</code>: item list
* <code>item:int</code> item to add
+
: <code>item:int</code>: item to add
* <code>item_value:str</code> value to add
+
: <code>item_value:str</code>: value to add
* <code>item_length:int</code> length of the buffer
+
: <code>item_length:int</code>: length of the buffer
==== returns ====
+
;returns
<code>None</code>
+
: <code>None</code>
 
+
----
 
=== getstr(il:object, index:int, flag:int)->str ===
 
=== getstr(il:object, index:int, flag:int)->str ===
 
Gets the string at the specified index in the item list.
 
Gets the string at the specified index in the item list.
==== parameters ====
+
;parameters
* <code>il:object</code> item list
+
: <code>il:object</code>: item list
* <code>index:int</code> index of the item to get
+
: <code>index:int</code>: index of the item to get
* <code>flag:int</code> if set to <code>1</code>, the first byte of the resulting string is the length of the string
+
: <code>flag:int</code>: if set to <code>1</code>, the first byte of the resulting string is the length of the string
==== returns ====
+
;returns
String
+
:String
 
+
----
 
=== addbin(il:object, item:int, item_value:int, item_offset:int, item_len:int)->None ===
 
=== addbin(il:object, item:int, item_value:int, item_offset:int, item_len:int)->None ===
Adds a new binary item to the list. It will be interpreted as a string.
+
Adds a new binary item to the item list. This item will be interpreted as a string.
==== parameters ====
+
;parameters
* <code>il:object</code> item list
+
: <code>il:object</code>: item list
* <code>item:int</code> item to add
+
: <code>item:int</code>: item to add
* <code>item_value:int</code> value to store
+
: <code>item_value:int</code>: value to store
* <code>item_offset:int</code> starting byte
+
: <code>item_offset:int</code>: starting byte
* <code>item_len:int</code> amount of bytes
+
: <code>item_len:int</code>: amount of bytes
==== returns ====
+
;returns
<code>None</code>
+
:<code>None</code>
 
+
----
 
=== getbyte(il:object, index:int, item_offset:int)->int ===
 
=== getbyte(il:object, index:int, item_offset:int)->int ===
 
Gets the byte at the specified position in the item list.
 
Gets the byte at the specified position in the item list.
==== parameters ====
+
;parameters
* <code>il:object</code> item list
+
: <code>il:object</code>: item list
* <code>index:int</code> index of the item
+
: <code>index:int</code>: index of the item
* <code>item_offset:int</code> starting byte
+
: <code>item_offset:int</code>: starting byte
==== returns ====
+
;returns
Integer value of the specified byte
+
:Integer value of the specified byte
 +
----
  
 
== vms.lib ==
 
== vms.lib ==
Provides functions from LIB$.
+
<br>Wraps the '''OpenVMS RTL Library (LIB$)''' functions.<br>
 
+
----
 
=== create_dir(name:str, uic:int, pe:int, pv:int)->int ===
 
=== create_dir(name:str, uic:int, pe:int, pv:int)->int ===
 
Creates a directory.
 
Creates a directory.
==== parameters ====
+
;parameters
* <code>name:str</code> name of the directory to be created (specified in OpenVMS style)
+
: <code>name:str</code>: name of the directory to be created (following the OpenVMS naming conventions)
* <code>uic:int</code> unsigned integer value of the owner UIC:  
+
: <code>uic:int</code>: unsigned integer value of the owner UIC:  
** <code>None</code> - the current user
+
:*<code>None</code>: current user
** <code>0</code> - owner of the parent directory
+
:*<code>0</code>: owner of the parent directory
* <code>pe:int</code> protection enable. See full documentation in the '''HP OpenVMS RTL Library(LIB$) Manual''' for LIB$CREATE_DIR.
+
: <code>pe:int</code>: protection-enable. Refer to the '''VSI OpenVMS RTL Library (LIB$) Manual''' for more info about LIB$CREATE_DIR.
* <code>pv:int</code> protection value
+
: <code>pv:int</code>: protection-value
==== returns ====
+
;returns
* <code>vms.ssdef.SS__CREATED</code> one or more directories created
+
: <code>vms.ssdef.SS__CREATED</code>: one or more directories created
* <code>vms.ssdef.SS__NORMAL</code> all specified directories already exist
+
: <code>vms.ssdef.SS__NORMAL</code>: all the specified directories already exist
* another error. See in '''vms.ssdef'''
+
: Some other error. See in '''vms.ssdef'''
 
+
----
 
=== date_time()->list ===
 
=== date_time()->list ===
 
Gets current date and time.
 
Gets current date and time.
==== parameters ====
+
;parameters
<code>None</code>
+
: <code>None</code>
==== returns ====
+
;returns
The list:
+
:The list:
* <code>int</code> status code of the operation
+
:*<code>int</code>: status code of the operation
* <code>str</code> resulting string
+
:*<code>str</code>: resulting string
 
+
----
 
=== get_ef()->list ===
 
=== get_ef()->list ===
Allocates a local event flag.
+
Allocates the local event flag.
==== parameters ====
+
;parameters
<code>None</code>
+
:<code>None</code>
==== returns ====
+
;returns
The list:
+
:The list:
* <code>int</code> status code of the operation
+
:*<code>int</code>: status code of the operation
* <code>int</code> resulting event flag
+
:*<code>int</code>: resulting event flag
 
+
----
 
=== free_ef(ef:int)->int ===
 
=== free_ef(ef:int)->int ===
 
Releases the local event flag.  
 
Releases the local event flag.  
==== parameters ====
+
;parameters
* <code>ef:int</code> the local event flag
+
: <code>ef:int</code>: local event flag
==== returns ====
+
;returns
Status code of the operation
+
:Status code of the operation
 
+
----
 
=== put_common(common:str)->int ===
 
=== put_common(common:str)->int ===
 
Copies a string into the common area.  
 
Copies a string into the common area.  
==== parameters ====
+
;parameters
* <code>common:str</code> string to copy
+
: <code>common:str</code>: string to copy
==== returns ====
+
;returns
Status code of the operation
+
:Status code of the operation
 
+
----
 
=== get_common()->list ===
 
=== get_common()->list ===
 
Gets the string from the common area.
 
Gets the string from the common area.
==== parameters ====
+
;parameters
<code>None</code>
+
: <code>None</code>
==== returns ====
+
;returns
The list:
+
:The list:
* <code>int</code> status code of the operation
+
:*<code>int</code>: status code of the operation
* <code>str</code> resulting string
+
:*<code>str</code>: resulting string
 
+
----
 
=== get_hostname(flags:int)->list ===
 
=== get_hostname(flags:int)->list ===
 
Gets the host name of the local system.
 
Gets the host name of the local system.
==== parameters ====
+
;parameters
* <code>flags:int</code> if set to <code>1</code>, the host node name is returned in the parsable form
+
: <code>flags:int</code> if set to <code>1</code>, the host node name is returned in a parseable format
==== returns ====
+
;returns
The list:
+
:The list:
* <code>int</code> status code of the operation
+
:*<code>int</code>: status code of the operation
* <code>str</code> resulting host node name
+
:*<code>str</code>: resulting host node name
 
+
----
 
=== getjpi(item_code:int, pid:int, pname:str)->list ===
 
=== getjpi(item_code:int, pid:int, pname:str)->list ===
 
Gets the specified job/process information as a string.
 
Gets the specified job/process information as a string.
==== parameters ====
+
;parameters
* <code>item_code:int</code> item identifier code defining the item of information to be returned. See '''vms.jpidef'''
+
: <code>item_code:int</code>: item identifier code defining the item of the information to be returned. See '''vms.jpidef'''
* <code>pid:int</code> process id
+
: <code>pid:int</code>: process ID
* <code>pname:str</code> process name
+
: <code>pname:str</code>: process name
For valid combination of the values of <code>pid</code> and <code>pname</code> see the '''HP OpenVMS RTL Library(LIB$) Manual''' for LIB$GETJPI. The resulting <code>pid</code> is not returned.
+
For valid combination of the values of <code>pid</code> and <code>pname</code>, see the '''OpenVMS RTL Library (LIB$) Manual''' for LIB$GETJPI. The resulting <code>pid</code> is not returned.
==== returns ====
+
;returns
The list:
+
:The list:
* <code>int</code> status code of the operation
+
:*<code>int</code>: status code of the operation
* <code>str</code> resulting string
+
:*<code>str</code>: resulting string
 
+
----
 
=== getsyi(item_code:int, node_name:str)->list ===
 
=== getsyi(item_code:int, node_name:str)->list ===
Gets system wide information as a string.
+
Gets system-wide information as a string.
==== parameters ====
+
;parameters
* <code>item_code:int</code> item identifier code defining the item of information to be returned. See '''vms.syidef'''
+
: <code>item_code:int</code>: item identifier code defining the item of the information to be returned. See '''vms.syidef'''
* <code>node_name:str</code> node name
+
: <code>node_name:str</code>: node name
==== returns ====
+
;returns
The list:
+
:The list:
* <code>int</code> status code of the operation
+
:*<code>int</code>: status code of the operation
* <code>str</code> resulting string
+
:*<code>str</code>: resulting string
* <code>int</code> resulting cluster system id
+
:*<code>int</code>: resulting cluster system ID
 
+
----
 
=== spawn(command:str, input_file:str, output_file:str, flags:int, pname:str)->list ===
 
=== spawn(command:str, input_file:str, output_file:str, flags:int, pname:str)->list ===
 
Requests the command language interpreter (CLI) of the calling process to spawn a subprocess for executing CLI commands.
 
Requests the command language interpreter (CLI) of the calling process to spawn a subprocess for executing CLI commands.
==== parameters ====
+
;parameters
* <code>command:str</code> command to execute
+
: <code>command:str</code>: command to execute
* <code>input_file:str</code> equivalence name to be associated with the logical name SYS$INPUT
+
: <code>input_file:str</code>: equivalence name to be associated with the logical name SYS$INPUT
* <code>output_file:str</code> equivalence name to be associated with the logical name SYS$OUTPUT
+
: <code>output_file:str</code>: equivalence name to be associated with the logical name SYS$OUTPUT
* <code>flags:int</code> flag bits that designate optional behavior. See '''vms.clidef'''
+
: <code>flags:int</code>: flag bits that designate optional behavior. See '''vms.clidef'''
* <code>pname:str</code> name defined for the subprocess
+
: <code>pname:str</code>: name defined for the subprocess
==== returns ====
+
;returns
The list:
+
:The list:
* <code>int</code> status code of the operation
+
:*<code>int</code>: status code of the operation
* <code>int</code> process id of the spawned process
+
:*<code>int</code>: process ID of the spawned process
 
+
----
 
=== do_command(command:str)->None ===
 
=== do_command(command:str)->None ===
 
Stops program execution and directs the command language interpreter (CLI) to execute a command that is supplied as the argument.
 
Stops program execution and directs the command language interpreter (CLI) to execute a command that is supplied as the argument.
==== parameters ====
+
;parameters
* <code>command:str</code> command to execute
+
: <code>command:str</code>: command to execute
==== returns ====
+
;returns
If successful, it does not return control to the calling program.
+
:If successful, it does not return control to the calling program.
 +
----
  
 
== vms.sys ==
 
== vms.sys ==
Provides functions from SYS$ library.
+
<br>Wraps the '''OpenVMS System Services''' functions.<br>
 
+
----
 
=== asctim(vms_time:int, time_only:int)->list ===
 
=== asctim(vms_time:int, time_only:int)->list ===
 
Converts an absolute or delta time from 64-bit system time format to an ASCII string.
 
Converts an absolute or delta time from 64-bit system time format to an ASCII string.
==== parameters ====
+
;parameters
* <code>vms_time:int</code> OpenVMS system time. A negative time value represents a delta time.
+
: <code>vms_time:int</code>: OpenVMS system time. A negative time value represents a delta time.
* <code>time_only:int</code> if set to <code>1</code>, asctim returns the hour only.
+
: <code>time_only:int</code>: if set to <code>1</code>, asctim returns the hour only.
==== returns ====
+
;returns
The list:
+
:The list:
* <code>int</code> status code of the operation
+
:*<code>int</code>: status code of the operation
* <code>str</code> resulting string
+
:*<code>str</code>: resulting string
 
+
----
 
=== bintim(time_str:str)->list ===
 
=== bintim(time_str:str)->list ===
 
Converts an ASCII string to an absolute or delta time value in the system 64-bit time format.
 
Converts an ASCII string to an absolute or delta time value in the system 64-bit time format.
==== parameters ====
+
;parameters
* <code>time_str:str</code> in format:
+
: <code>time_str:str</code> in the following format:
** Absolute Time: dd-mmm-yyyy hh:mm:ss.cc
+
:*Absolute Time: dd-mmm-yyyy hh:mm:ss.cc
** Delta Time: dddd hh:mm:ss.cc
+
:*Delta Time: dddd hh:mm:ss.cc
==== returns ====
+
;returns
The list:
+
:The list:
* <code>int</code> status code of the operation
+
:*<code>int</code>: status code of the operation
* <code>int</code> resulting time value
+
:*<code>int</code>: resulting time value
 
+
----
 
=== asctoid(name:str)->list ===
 
=== asctoid(name:str)->list ===
 
Translates the specified identifier name into its binary identifier value.
 
Translates the specified identifier name into its binary identifier value.
==== parameters ====
+
;parameters
* <code>name:str</code> identifier name
+
: <code>name:str</code>: identifier name
==== returns ====
+
;returns
The list:
+
:The list:
* <code>int</code> status code of the operation
+
:*<code>int</code>: status code of the operation
* <code>int</code> resulting identifier value
+
:*<code>int</code>: resulting identifier value
* <code>int</code> resulting identifier attributes. See '''vms.kgbdef'''
+
:*<code>int</code>: resulting identifier attributes. See '''vms.kgbdef'''
 
+
----
 
=== idtoasc(id_val:int, context:int)->list ===
 
=== idtoasc(id_val:int, context:int)->list ===
 
Translates the specified identifier value to the identifier name.
 
Translates the specified identifier value to the identifier name.
==== parameters ====
+
;parameters
* <code>id_val:int</code> identifier value. See '''HP OpenVMS System Services Reference Manual''' for SYS$IDTOASC
+
: <code>id_val:int</code>: identifier value. See '''OpenVMS System Services Reference Manual''' for SYS$IDTOASC
* <code>context:int</code> context value used when <code>idtoasc</code> is called repeatedly. Must be initialized with the value 0.
+
: <code>context:int</code>: context value used when <code>idtoasc</code> is called repeatedly. Must be initialized with the value <code>0</code>.
==== returns ====
+
;returns
The list:
+
:The list:
* <code>int</code> status code of the operation
+
:*<code>int</code>: status code of the operation
* <code>str</code> resulting identifier name
+
:*<code>str</code>: resulting identifier name
* <code>int</code> resulting identifier value
+
:*<code>int</code>: resulting identifier value
* <code>int</code> resulting identifier attributes. See '''vms.kgbdef'''
+
:*<code>int</code>: resulting identifier attributes. See '''vms.kgbdef'''
* <code>int</code> resulting context
+
:*<code>int</code>: resulting context
 
+
----
 
=== crembx(tmp:int, maxmsg:int, bufquo:int, promsk:int, acmode:int, mbx_name:string, flags:int)->list ===
 
=== crembx(tmp:int, maxmsg:int, bufquo:int, promsk:int, acmode:int, mbx_name:string, flags:int)->list ===
 
Creates a virtual mailbox device.
 
Creates a virtual mailbox device.
==== parameters ====
+
;parameters
* <code>tmp:int</code> the first bit specifies a permanent mailbox  
+
: <code>tmp:int</code>: the first bit specifies a permanent mailbox  
* <code>maxmsg:int</code> maximum size of a message (in bytes)
+
: <code>maxmsg:int</code>: maximum size of a message (in bytes)
* <code>bufquo:int</code> number of bytes of system dynamic memory that can be used to buffer messages sent to the mailbox
+
: <code>bufquo:int</code>: number of bytes of system dynamic memory that can be used to buffer messages sent to the mailbox
* <code>promsk:int</code> protection mask to be associated with the created mailbox
+
: <code>promsk:int</code>: protection mask to be associated with the created mailbox
* <code>acmode:int</code> access mode to be associated with the channel to which the mailbox is assigned
+
: <code>acmode:int</code>: access mode to be associated with the channel to which the mailbox is assigned
* <code>mbx_name:string</code> logical name to be assigned to the mailbox
+
: <code>mbx_name:string</code>: logical name to be assigned to the mailbox
* <code>flags:int</code> options for the assign operation. See '''vms.cmbdef'''
+
: <code>flags:int</code>: options for the assign operation. See '''vms.cmbdef'''
==== returns ====
+
;returns
The list:
+
:The list:
* <code>int</code> status code of the operation
+
:*<code>int</code>: status code of the operation
* <code>int</code> resulting channel
+
:*<code>int</code>: resulting channel
 
+
----
 
=== delmbx(channel:int)->int ===
 
=== delmbx(channel:int)->int ===
 
Marks a permanent mailbox for deletion.
 
Marks a permanent mailbox for deletion.
==== parameters ====  
+
;parameters
* <code>channel:int</code> mailbox channel
+
: <code>channel:int</code>: mailbox channel
==== returns ====
+
;returns
Status code
+
:Status code
 +
----
 +
=== assign(devnam:str, acmode:int, mbxnam:str, flags:int)->list ===
 +
Provides a process with an I/O channel.
 +
;parameters
 +
: <code>devnam:str</code>: name of the device
 +
: <code>acmode:int</code>: access mode to be associated with the channel
 +
: <code>mbxnam:str</code>: logical name of the mailbox to be associated with the device
 +
: <code>flags:int</code>: an optional device-specific argument
 +
;returns
 +
:The list:
 +
:*<code>int</code>: status code of the operation
 +
:*<code>int</code>: resulting channel
 +
----
 +
=== dassgn(channel:int)->int ===
 +
Unassigns (releases) an I/O channel.
 +
;parameters
 +
: <code>channel:int</code>: number of the I/O channel to be unassigned
 +
;returns
 +
:Status code
 +
----
 +
=== readvblk(channel:int, max_read:int, block:int, fmod:int)->list ===
 +
Read from the I/O channel.
 +
;parameters
 +
: <code>channel:int</code>: I/O channel
 +
: <code>max_read:int</code>: amount of bytes to read
 +
: <code>block:int</code>: starting block
 +
: <code>fmod:int</code>: function code modifiers
 +
;returns
 +
:The list:
 +
:*<code>int</code>: status code of the operation
 +
:*<code>byte</code>: resulting buffer
 +
:*<code>int</code>: I/O completion code
 +
----
 +
=== writevblk(channel:int, buffer:bytes, block:int, fmod:int)->list ===
 +
Write to the I/O channel.
 +
;parameters
 +
: <code>channel:int</code>: I/O channel
 +
: <code>buffer:bytes</code>: bytes to write
 +
: <code>block:int</code>: starting block
 +
: <code>fmod:int</code>: function code modifiers
 +
;returns
 +
:The list:
 +
:*<code>int</code>: status code of the operation
 +
:*<code>int</code>: amount of written bytes
 +
:*<code>int</code>: I/O completion code
 +
----
 +
=== cancel(channel:int)->int ===
 +
Cancel the I/O operation.
 +
;parameters
 +
: <code>channel:int</code>: I/O channel
 +
;returns
 +
:Status code
 +
----
 +
=== crelnm(attr:int, tabnam:str, lognam:str, acmode:int, il:object)->int ===
 +
Creates a logical name and specifies its equivalence names.
 +
;parameters
 +
: <code>attr:int</code>: attributes to be associated with the logical name. See '''vms.lnmdef'''
 +
: <code>tabnam:str</code>: name of the table in which to create the logical name
 +
: <code>lognam:str</code>: logical name to be created
 +
: <code>acmode:int</code>: access mode to be associated with the logical name. See '''vms.psldef'''
 +
: <code>il:object</code>: item list, created via [[VMS specific Python modules#new()->object|<code>vms.ile3.new()</code>]]
 +
See '''OpenVMS System Services Reference Manual''' for SYS$CRELNM.
 +
;returns
 +
:Status code
 +
----
 +
=== trnlnm(attr:int, tabnam:str, lognam:str, acmode:int, il:object)->int ===
 +
Returns information about the specified logical name.
 +
;parameters
 +
: <code>attr:int</code>: attributes controlling the search for the logical name. See '''vms.lnmdef'''
 +
: <code>tabnam:str</code>: name of the logical name table or the name of a searchlist logical name
 +
: <code>lognam:str</code>: logical name for which information is to be returned
 +
: <code>acmode:int</code>: access mode to be used in the translation. See '''vms.psldef'''
 +
: <code>il:object</code>: item list, created via [[VMS specific Python modules#new()->object|<code>vms.ile3.new()</code>]]
 +
See '''OpenVMS System Services Reference Manual''' for SYS$TRNLNM.
 +
;returns
 +
:Status code
 +
----
 +
=== dellnm(tabnam:str, lognam:str, acmode:int)->int ===
 +
Deletes all logical names with the specified name.
 +
;parameters
 +
: <code>tabnam:str</code>: name of a logical name table or the name of a searchlist logical name
 +
: <code>lognam:str</code>: logical name to be deleted
 +
: <code>acmode:int</code>: access mode to be used in the delete operation. See '''vms.psldef'''
 +
;returns
 +
:Status code
 +
----
 +
=== device_scan(search_devnam:str, item_list:object, context:int)->list ===
 +
Returns the names of all devices that match a specified set of search criteria.
 +
;parameters
 +
: <code>search_devnam:str</code>: name of the device for which <code>device_scan</code> to search
 +
: <code>item_list:object</code>: item list specifying search criteria
 +
: <code>context:int</code>: value used to indicate the current position of the search. On the initial call it must contain <code>0</code>.
 +
See '''OpenVMS System Services Reference Manual''' for SYS$DEVICE_SCAN
 +
;returns
 +
:The list:
 +
:* <code>int</code>: status code of the operation
 +
:* <code>str</code>: found device name
 +
:* <code>int</code>: context
 +
----
 +
=== uicstr(uic:int, flags:int)->list ===
 +
Converts UIC to a string.
 +
;parameters
 +
: <code>uic:int</code>: UIC
 +
: <code>flags:int</code>
 +
:*<code>0</code>: use "!%I" SYS$FAO format
 +
:*<code>1</code>: use "!%U" SYS$FAO format
 +
;returns
 +
:The list:
 +
:*<code>int</code>: status code of the operation
 +
:*<code>str</code>: UIC string
 +
----
 +
=== getdvi(dev_nam:str, item_list:object)->int ===
 +
Returns information related to the primary and secondary device characteristics of an I/O device.
 +
;parameters
 +
: <code>dev_nam:str</code>: the name of the device for which information is to be returned
 +
: <code>item_list:object</code>: item list specifying which information about the device is to be returned
 +
See '''OpenVMS System Services Reference Manual''' for SYS$GETDVI
 +
;returns
 +
:Status code
 +
----
 +
=== getjpi(pid:int, pnam:str, item_list:object)->list ===
 +
Returns information about one or more processes of the system or across the OpenVMS Cluster system.
 +
;parameters
 +
: <code>pid:int</code>: process identification
 +
: <code>pnam:str</code>: name of the process
 +
: <code>item_list:object</code>: item list specifying which information about the process or processes is to be returned
 +
See '''OpenVMS System Services Reference Manual''' for SYS$GETJPI
 +
;returns
 +
:The list:
 +
:* <code>int</code>: status code of the operation
 +
:* <code>int</code>: process ID
 +
----
 +
=== getlki(lki:int, item_list:object)->list ===
 +
Returns information about the lock database on a system.
 +
;parameters
 +
: <code>lki:int</code>: identification of the lock (lock ID) information about which needs to be returned
 +
: <code>item_list:object</code>: item list specifying the lock information to be returned
 +
See '''OpenVMS System Services Reference Manual''' for SYS$GETLKI
 +
;returns
 +
:The list:
 +
:*<code>int</code>: status code of the operation
 +
:*<code>int</code>: lock identification
 +
----
 +
=== getmsg(msgid:int, flags:int)->list ===
 +
Returns message text associated with a given message identification code.
 +
;parameters
 +
: <code>msgid:int</code>: identification of the message to be retrieved
 +
: <code>flags:int</code>: message components to be returned
 +
See '''OpenVMS System Services Reference Manual''' for SYS$GETMSG
 +
;returns
 +
:The list:
 +
:* <code>int</code>: status code of the operation
 +
:* <code>str</code>: message string
 +
:* <code>int</code>: optional information
 +
----
 +
=== getqui(func:int, context:int, item_list:object)->list ===
 +
Returns information about queues and the jobs initiated from these queues.
 +
;parameters
 +
: <code>func:int</code>: function code specifying the function that <code>getqui</code> is to perform. See '''vms.quidef'''
 +
: <code>context:int</code>: context stream for this call
 +
: <code>item_list:object</code>: item list supplying the information to be used by the function
 +
See '''OpenVMS System Services Reference Manual''' for SYS$GETQUI
 +
;returns
 +
:The list:
 +
:*<code>int</code>: status code of the operation
 +
:*<code>int</code>: context
 +
----
 +
=== getrmi(item_list:object)->int ===
 +
Returns system performance information about the local system.
 +
;parameters
 +
: <code>item_list:object</code>: item list specifying which information about the local node is to be returned
 +
See '''OpenVMS System Services Reference Manual''' for SYS$GETRMI
 +
;returns
 +
:Status code
 +
----
 +
=== getsyi(csid:int, node_name:str, item_list:object)->list ===
 +
Returns information about the local system or about other systems in an OpenVMS Cluster system.
 +
;parameters
 +
: <code>csid:int</code>: OpenVMS Cluster system identification
 +
: <code>node_name:str</code>: name of the node about which information is to be returned
 +
: <code>item_list:object</code>: item list specifying which information about the node or nodes to return
 +
See '''OpenVMS System Services Reference Manual''' for SYS$GETSYI
 +
;returns
 +
:The list:
 +
:*<code>int</code>: status code of the operation
 +
:*<code>int</code>: CSID
 +
----
 +
=== gettim()->list ===
 +
Returns the current system time in a 64-bit format.
 +
;parameters
 +
:<code>None</code>
 +
;returns
 +
:The list:
 +
:*<code>int</code>: status code of the operation
 +
:*<code>int</code>: current system time
 +
----
 +
=== getuai(user_name:str, item_list:object)->int ===
 +
Returns authorization information about the specified user.
 +
;parameters
 +
: <code>user_name:str</code>: name of the user to get authorization information for
 +
: <code>item_list:object</code>: item list specifying which information to return
 +
See '''OpenVMS System Services Reference Manual''' for SYS$GETUAI
 +
;returns
 +
:Status code
 +
----
 +
=== hiber()->int ===
 +
Allows a process to make itself inactive but to remain known to the system so that it can be interrupted.
 +
;parameters
 +
:<code>None</code>
 +
;returns
 +
:Status code
 +
----
 +
=== schdwk(pid:int, pname:str, time:int, reptim:int)->list ===
 +
Schedules the awakening (restart) of a process that has placed itself in the state of hibernation with the Hibernate service.
 +
;parameters
 +
: <code>pid:int</code>: process identification (PID) of the process to be awakened
 +
: <code>pname:str</code>: name of the process to be awakened
 +
: <code>time:int</code>: time at which the process is to be awakened
 +
: <code>reptim:int</code>: time interval at which the wakeup request is to be repeated
 +
See '''OpenVMS System Services Reference Manual''' for SYS$SCHDWK
 +
;returns
 +
:The list:
 +
:*<code>int</code>: status code of the operation
 +
:*<code>int</code>: PID
 +
----
 +
 
 +
=== add_holder(id:int, holder:int, attrib:int)->int ===
 +
Adds the specified holder record to the target identifier.
 +
;parameters
 +
: <code>id:int</code>: target identifier granted to the specified holder
 +
: <code>holder:int</code>: holder identifier that is granted access to the target identifier
 +
: <code>attrib:int</code>: attributes to be placed in the holder record
 +
See '''OpenVMS System Services Reference Manual''' for SYS$ADD_HOLDER
 +
;returns
 +
:Status code
 +
----
 +
=== add_ident(name:str, id:int, attrib:int)->list ===
 +
Adds the specified identifier to the rights database.
 +
;parameters
 +
: <code>name:str</code>: identifier name to be added to the rights database
 +
: <code>id:int</code>: identifier to be created
 +
: <code>attrib:int</code>: attributes placed in the identifier’s record
 +
See '''OpenVMS System Services Reference Manual''' for SYS$ADD_IDENT
 +
;returns
 +
:The list:
 +
:*<code>int</code>: status code of the operation
 +
:*<code>int</code> <code>resid</code>: identifier value assigned by the system
 +
----
 +
=== find_held(holder:int, context:int)->list ===
 +
Returns the identifiers held by the specified holder.
 +
;parameters
 +
: <code>holder:int</code>: holder whose identifiers to be found
 +
: <code>context:int</code>: context value used when <code>find_held</code> is called repeatedly
 +
See '''OpenVMS System Services Reference Manual''' for SYS$FIND_HELD
 +
;returns
 +
:The list:
 +
:*<code>int</code>: status code of the operation
 +
:*<code>int</code> <code>id</code>: identifier value that was found
 +
:*<code>int</code> <code>attrib</code>: attributes associated with the holder returned in <code>id</code>
 +
:*<code>int</code> <code>context</code>
 +
----
 +
=== finish_rdb(context:int)->int ===
 +
Deallocates the record stream and clears the context value.
 +
;parameters
 +
: <code>context:int</code>: context value to be cleared
 +
;returns
 +
:Status code
 +
----
 +
=== forcex(pid:int, pname:str, code:int)->int ===
 +
Causes an Exit ($EXIT) service call to be issued on behalf of a specified process.
 +
;parameters
 +
: <code>pid:int</code>: process identification (PID) of the process to force exit
 +
: <code>pname:str</code>: process name of the process that is to force exit
 +
: <code>code:int</code>: completion code value to be used as the exit parameter
 +
;returns
 +
:Status code
 +
----
 +
=== rem_holder(id:int, holder:int)->int ===
 +
Deletes the specified holder record from the target identifier’s list of holders.
 +
;parameters
 +
: <code>id:int</code>: binary value of the target identifier
 +
: <code>holder:int</code>: identifier of the holder being deleted
 +
;returns
 +
:Status code
 +
----
 +
=== rem_ident(id:int)->int ===
 +
Removes the specified identifier record and all its holder records (if any) from the rights database.
 +
;parameters
 +
: <code>id:int</code>: binary value of the identifier deleted from rights database
 +
;returns
 +
:Status code
 +
----
 +
=== setuai(user_name:str, item_list:object)->int ===
 +
Modifies the user authorization file (UAF) record for the specified user.
 +
;parameters
 +
: <code>user_name:str</code>: name of the user whose UAF record is modified
 +
: <code>item_list:object</code>: item list specifying which information from the specified UAF record is to be modified
 +
See '''OpenVMS System Services Reference Manual''' for SYS$SETUAI
 +
;returns
 +
:Status code
 +
----
 +
=== show_intrusion(user_criteria:str, flags:int, context:int)->list ===
 +
Searches for and returns information about records in the intrusion database matching the caller specifications.
 +
;parameters
 +
: <code>user_criteria:str</code>: description of an intruder or suspect
 +
: <code>flags:int</code>: type of records in the intrusion database about which information is to be returned. NOTE: do not use ''vms.ciadef.CIA_M_ITEMLIST'', because <code>user_criteria</code> is a string
 +
: <code>context:int</code>: context information to keep between related calls
 +
See '''OpenVMS System Services Reference Manual''' for SYS$SETUAI
 +
;returns
 +
:The list:
 +
:*<code>int</code>: status code of the operation
 +
:*<code>str</code> <code>intruder</code>: user specification of the matched intruder or suspect record in the intrusion database
 +
:*<code>int</code> <code>expires</code>: quadword time format indicating the time when the record will expire
 +
:*<code>int</code> <code>type</code>: the types of the matched record and the status of the suspect
 +
:*<code>int</code> <code>count</code>: number of login failures or break-in attempts
 +
----
  
 
== rdb ==
 
== rdb ==
 +
<br>Wraps the '''Oracle Rdb''' functions.
 +
----
 +
=== Attach(dbname:string)->int ===
 +
Attaches to the specified database. The string may specify the full path to the Rdb database in the OpenVMS format or (more commonly) a logical name pointing to the database.
 +
;parameters
 +
: <code>dbname:string</code>: path or logical name
 +
;returns
 +
:Status code:
 +
:* <code>0</code>: success
 +
:* <code>-1</code>: failed
 +
----
 +
=== CloseCursor(cursor:object)->int ===
 +
Closes the specified cursor.
 +
;parameters
 +
: <code>cursor:object</code>: cursor
 +
;returns
 +
:Status code:
 +
:*<code>0</code>: success
 +
:*<code>-1</code>: failed
 +
----
 +
=== Commit()->int ===
 +
Commits the current database transaction.
 +
;parameters
 +
:<code>None</code>
 +
;returns
 +
:Status code:
 +
:*<code>0</code>: success
 +
:*<code>-1</code>: failed
 +
----
 +
=== Data(cursor:object, idx:int)->str ===
 +
Given a cursor handle and column index (integer), returns the data value for the specified column for the last fetch operation.
 +
;parameters
 +
: <code>cursor:object</code>: cursor
 +
: <code>idx:int</code>: index
 +
;returns
 +
:Resulting string
 +
----
 +
=== DeclareCursor(name:str, statement:str)->object ===
 +
Declares a cursor. Inputs are the name for the cursor and the SQL statement. On success the function returns a cursor handle that can be used with <code>OpenCursor()</code>, <code>FetchCursor()</code>, and <code>CloseCursor()</code>.
 +
;parameters
 +
: <code>name:str</code>: name for the cursor
 +
: <code>statement:str</code>: SQL statement
 +
;returns
 +
:Resulting cursor
 +
----
 +
=== Detach()->int ===
 +
Disconnects from the database.
 +
;parameters
 +
<code>None</code>
 +
;returns
 +
:Status code:
 +
:*<code>0</code>: success
 +
:*<code>-1</code>: failed
 +
----
 +
=== Error()->str ===
 +
Returns a description of the last error.
 +
;parameters
 +
: <code>None</code>
 +
;returns
 +
:Resulting error string
 +
----
 +
=== Exec(sh:object)->int ===
 +
Executes a previously prepared SQL statement.
 +
;parameters
 +
: <code>sh:object</code>: prepared SQL statement
 +
;returns
 +
:Status code:
 +
:*<code>0</code>: success
 +
:*<code>-1</code>: failed
 +
----
 +
=== ExecI(st:str)->int ===
 +
Executes the supplied SQL statement immediately.<br>
 +
    '''Note: the last letter is a capital 'i'
 +
;parameters
 +
: <code>st:str</code>: SQL statement
 +
;returns
 +
:Status code:
 +
:*<code>0</code>: success
 +
:*<code>-1</code>: failed
 +
----
 +
=== Fetch(cursor:object)->int ===
 +
Fetches a row of data for the specified cursor but does not explicitly return the fetched data. The <code>Data()</code> method can then be used to retrieve individual data values for each column (<code>Ncol()</code> can be used to determine the number of columns).
 +
;parameters
 +
: <code>cursor:object</code>: cursor
 +
;returns
 +
:Status code:
 +
:*<code>1</code>: success
 +
:*<code>0</code>: success, end of stream
 +
:*<code>-1</code>: failed
 +
----
 +
=== FetchRow(cursor:object)->list ===
 +
Fetches a row of data using the specified cursor handle. The fetched data is returned as a list of strings.
 +
;parameters
 +
: <code>cursor:object</code>: cursor
 +
;returns
 +
:The list of strings
 +
----
 +
=== Free(cursor:object)->int ===
 +
Frees resources associated with the supplied cursor handle for a cursor previously declared via <code>DeclareCursor()</code>.
 +
;parameters
 +
: <code>cursor:object</code>: cursor
 +
;returns
 +
:Status code:
 +
:*<code>0</code>: success
 +
----
 +
=== Ncol(cursor:object)->int ===
 +
Returns the number of columns (values) that would be returned by a fetch for the specified cursor.
 +
;parameters
 +
: <code>cursor:object</code>: cursor
 +
;returns
 +
:Number of columns
 +
----
 +
=== OpenCursor(cursor:object)->int ===
 +
Opens a cursor using the supplied (previously declared) cursor handle.
 +
;parameters
 +
: <code>cursor:object</code>: cursor
 +
;returns
 +
:Status code:
 +
:*<code>0</code>: success
 +
:*<code>-1</code>: failed
 +
----
 +
=== Prepare(st:string)->object ===
 +
Prepares an SQL statement and returns a handle for the prepared statement that can be used in subsequent calls to Exec().
 +
;parameters
 +
: <code>st:string</code>: SQL statement
 +
;returns
 +
:Resulting prepared statement
 +
----
 +
=== Rollback()->int ===
 +
Rolls back the current database transaction.
 +
;parameters
 +
:<code>None</code>
 +
;returns
 +
:Status code:
 +
:*<code>0</code>: success
 +
:*<code>-1</code>: failed
 +
----
 +
=== SetReadonly()->int ===
 +
Starts a read-only transaction.
 +
;parameters
 +
:<code>None</code>
 +
;returns
 +
:Status code:
 +
:*<code>0</code>: success
 +
:*<code>-1</code>: failed
 +
----
 +
=== Sqlcode()->int ===
 +
Returns the SQLCODE for the last database operation.
 +
;parameters
 +
:<code>None</code>
 +
;returns
 +
:Resulting SQL code
 +
----
 +
 +
== RMS ==
 +
<br>Working with RMS.<br>
 +
 +
It should be noted that the RMS module is intended for use with indexed RMS files only.
 +
 +
----
 +
=== BCD2String(bcd:bytes, prec:int)->str ===
 +
Converts BCD to string.
 +
;parameters
 +
: <code>bcd:bytes</code>: BCD
 +
: <code>prec:int</code>: precision
 +
;returns
 +
: <code>str</code>: BCD number as a string
 +
----
 +
 +
=== String2BCD(repr:str, l:int, prec:int)->bytes ===
 +
Converts string to BCD.
 +
;parameters
 +
: <code>repr:str</code>: string representation of the BCD number
 +
: <code>l:int</code>: length
 +
: <code>prec:int</code>: precision
 +
;returns
 +
: <code>bytes</code>: BCD from string
 +
----
 +
 +
=== BCD2Tuple(bcd:bytes, prec:int)->tuple ===
 +
Converts BCD to tuple: (sign, (digits,), precision).
 +
;parameters
 +
: <code>bcd:bytes</code>: BCD
 +
: <code>prec:int</code>: precision
 +
;returns
 +
: <code>tuple</code>: BCD parsed to a tuple
 +
----
 +
 +
=== Tuple2BCD(repr:tuple, l:int, prec:int)->bytes ===
 +
Converts tuple to BCD.
 +
;parameters
 +
: <code>repr:tuple</code>: tuple representation of the BCD number
 +
: <code>l:int</code>: length
 +
: <code>prec:int</code>: precision
 +
;returns
 +
: <code>bytes</code>: BCD from tuple
 +
----
 +
 +
=== getrmsattr(path:str, attr:int)->int ===
 +
Gets an RMS attribute.
 +
;parameters
 +
: <code>path:str</code>: VMS path to the file
 +
: <code>attr:int</code>: attribute to retrieve
 +
;returns
 +
: <code>attr:int</code>: attribute value
 +
----
 +
 +
=== parse(path:str)->tuple ===
 +
Parses the VMS path to a tuple of bytes: (node, disk, directory, name, extension, version)
 +
;parameters
 +
: <code>path:str</code>: VMS path to the file
 +
;returns
 +
: <code>tuple</code>: parsed path
 +
----
 +
 +
=== file(name:str, fac:int, shr:int, fop:int)->rmsFile ===
 +
Opens a file
 +
;parameters
 +
: <code>path:str</code>: VMS path to the file
 +
: <code>fac:int</code>: file access
 +
: <code>shr:int</code>: sharing options
 +
: <code>fop:int</code>: file processing options
 +
;returns
 +
: <code>file:rmsFile</code>: rmsFile object
 +
----
 +
 +
=== RMS file object ===
 +
 +
==== Members ====
 +
===== longname =====
 +
Full path to the file
 +
===== nok =====
 +
Number of keys
 +
===== org =====
 +
File organization
 +
----
 +
==== Methods ====
 +
===== close =====
 +
close() -> status<br>
 +
Closes file.
 +
----
 +
===== delete =====
 +
delete([key]) -> status<br>
 +
Deletes the current record or the first record with the given key.
 +
----
 +
===== fetch =====
 +
fetch([key]) -> status, record<br>
 +
Retrieves the record from a file.
 +
----
 +
===== find =====
 +
find([key]) -> status<br>
 +
Locates the specified record and establishes it as the current record.
 +
----
 +
===== flush =====
 +
flush() -> status<br>
 +
Writes out all modified I/O buffers and file attributes associated with the file.
 +
----
 +
===== free =====
 +
free() -> status<br>
 +
Unlocks all records that were previously locked for the record stream.
 +
----
 +
===== put =====
 +
put(record) -> status<br>
 +
Inserts a record into a file.
 +
----
 +
===== release =====
 +
release() -> status<br>
 +
Unlocks the record.
 +
----
 +
===== rewind =====
 +
rewind([keynum]) -> status<br>
 +
Sets the context of a record stream to the first record in the file.
 +
----
 +
===== update =====
 +
update(record) -> status<br>
 +
Allows to modify the contents of an existing record in a file residing on a disk device.
 +
----
 +
===== usekey =====
 +
usekey([keynum]) -> status<br>
 +
Specifies the key or index to which the operation applies.
 +
----
 +
===== setrop =====
 +
setrop(rop) -> status<br>
 +
Specifies which of the various optional record operations are to be implemented for the program.
 +
----
 +
 +
=See also=
 +
* {{Template:CRuntime}}
 +
* {{Template:RTLLibrary}}
 +
* {{Template:SyservI}}
 +
* {{Template:SyservII}}
 +
 +
[[Category:VMS Python]]

Latest revision as of 23:26, 6 July 2022

Contents

vms.decc


Wraps the C Run-Time Library for OpenVMS Systems functions.


dlopen_test(name:str)->int

Checks if a shared image can be opened and loaded into memory.

parameters
name:str: path to the shared image
returns
1: if the shared image exists and can be opened by dlopen()
0: otherwise

fix_time(vms_time:int)->int

Converts the VMS time to the Unix time stamp.

parameters
vms_time:int: VMS system time
returns
Time in the Unix format (number of seconds since 01/01/1970)

from_vms(vms_path:str, wild_flag:int)->list

Converts the VMS path to a list of Unix paths.

parameters
vms_path:str: path in the VMS format (supports wildcards)
wild_flag:int: If set to 0, the wildcards found in vms_path are not expanded
returns
List of paths in the Unix notation

getenv(name:str, def_value:str)->str

Gets the specified environment variable value. See getenv() description in the VSI C Run-Time Library Reference Manual for OpenVMS Systems.

parameters
name:str: name of the environment variable
def_value:str: default value
returns
Environment variable value

sleep(seconds:int)->int

Suspends execution of the current process or thread for the specified number of seconds.

parameters
seconds:int: seconds to sleep
returns
The number of seconds left before the sleep timer expires if sleep is interrupted. 0 if the process slept for the specified number of seconds

sysconf(name:int)->int

Provides a method for determining the current value of a configurable system limit or whether optional features are supported.

parameters
name:int: system variable to be queried
returns
Requested value

to_vms(unix_path:str, allow_wild:int, no_directory:int)->list

Converts the UNIX style file specifications to the OpenVMS file specifications.

parameters
unix_path:str: file name following the Unix file naming conventions
allow_wild:int: If set to 0, the wildcards found in unix_path are not expanded
no_directory:int An integer that has one of the following values:
  • 0 - Directory allowed
  • 1 - Prevent expansion of the string as a directory name
  • 2 - Force expansion of the string as a directory name
returns

List of OpenVMS style pathnames


unixtime(vms_time:int)->int

Converts the OpenVMS system time to the Unix local time.

parameters
vms_time:int OpenVMS system time
returns
Unix time

vmstime(unix_time:int)->int

Converts Unix time to the OpenVMS system time.

parameters
unix_time:int: Unix time
returns

OpenVMS system time


get_symbol(name:str)->list

Requests the calling process’s command language interpreter (CLI) to return the value of a CLI symbol as a string.

parameters
name:str: Name of the symbol
returns
The list:
  • int: status code of the operation
  • str: value of the returned symbol

fopen(path:str, mode:str, ...)->fp:object

Opens a file.

parameters
path:str: A character string containing a valid file specification
mode:str: The access mode indicator
...:str: Optional file attribute arguments
returns
  • fp:object: File pointer

fclose(fp:object)->status:int

Closes a file.

parameters
fp:object: A pointer to the file to be closed
returns
  • status:int: status code of the operation

fileno(fp:object)->fd:int

Returns the file descriptor associated with the specified file pointer.

parameters
fp:object: A pointer to the file
returns
  • fd:int: Integer file descriptor

write(fd:int, data:bytes)->nbytes:int

Writes bytes to a file.

parameters
fd:int: Integer file descriptor
data:bytes: Bytes to write
returns
  • nbytes:int: The number of bytes written

fgets(fp:object, maxchars:int)->line:str

Reads a line from the specified file, up to one less than the specified maximum number of characters or up to and including the newline character, whichever comes first.

parameters
fp:object: A pointer to the file
maxchars:int: The maximum number of characters to fetch
returns
  • line:str: The fetched line

feof(fp:object)->status:int

Tests a file to see if the end-of-file has been reached.

parameters
fp:object: A pointer to the file
returns
  • status:int: Nonzero integer indicates that the end-of-file has been reached

ferror(fp:object)->status:int

Returns a nonzero integer if an error occurred while reading or writing a file.

parameters
fp:object: A pointer to the file
returns
  • status:int: Nonzero integer indicates that an error has occurred

vms.ile3


Provides functions to work with item lists.


new()->object

Creates an empty item list.

parameters
None
returns
New empty item list

delete(il:object)->None

Deletes the item list.

parameters
il:object: item list to be removed
returns
None

size(il:object)->int

Gets the size of the item list.

parameters
il:object: item list
returns
The size of the specified item list

addint(il:object, item:int, item_type:int, item_value:int)->None

Adds a new integer to the item list.

parameters
il:object: item list
item:int: item to add
item_type:int: type of the item. See vms.dscdef
item_value:int: value of the item
returns
None

getint(il:object, index:int)->int

Gets the integer at the specified index in the item list.

parameters
il:object: item list
index:int: index of the item to get
returns
Integer value

gethex(il:object, index:int)->str

Gets the integer at the specified index in the item list and returns it as a hexadecimal string.

parameters
il:object: item list
index:int: index of the item to get
returns
Hexadecimal string

addstr(il:object, item:int, item_value:str, item_length:int)->None

Adds the specified string to the item list. If item_value is not None, item_length is ignored and the length of the buffer will be the same as the length of item_value.

parameters
il:object: item list
item:int: item to add
item_value:str: value to add (or None)
item_length:int: length of the buffer if item_value is None
returns
None

addstrd(il:object, item:int, item_value:str, item_length:int)->None

Adds the specified space-expanded string to the item list. The first byte of the buffer is the length of the string. If item_value is longer than item_length, it will be truncated.

parameters
il:object: item list
item:int: item to add
item_value:str: value to add
item_length:int: length of the buffer (the resulting string length is one byte less)
returns
None

addstrn(il:object, item:int, item_value:str, item_length:int)->None

Adds the specified space-expanded string to the item list. If item_value is longer than item_length, it will be truncated.

parameters
il:object: item list
item:int: item to add
item_value:str: value to add
item_length:int: length of the buffer
returns
None

getstr(il:object, index:int, flag:int)->str

Gets the string at the specified index in the item list.

parameters
il:object: item list
index:int: index of the item to get
flag:int: if set to 1, the first byte of the resulting string is the length of the string
returns
String

addbin(il:object, item:int, item_value:int, item_offset:int, item_len:int)->None

Adds a new binary item to the item list. This item will be interpreted as a string.

parameters
il:object: item list
item:int: item to add
item_value:int: value to store
item_offset:int: starting byte
item_len:int: amount of bytes
returns
None

getbyte(il:object, index:int, item_offset:int)->int

Gets the byte at the specified position in the item list.

parameters
il:object: item list
index:int: index of the item
item_offset:int: starting byte
returns
Integer value of the specified byte

vms.lib


Wraps the OpenVMS RTL Library (LIB$) functions.


create_dir(name:str, uic:int, pe:int, pv:int)->int

Creates a directory.

parameters
name:str: name of the directory to be created (following the OpenVMS naming conventions)
uic:int: unsigned integer value of the owner UIC:
  • None: current user
  • 0: owner of the parent directory
pe:int: protection-enable. Refer to the VSI OpenVMS RTL Library (LIB$) Manual for more info about LIB$CREATE_DIR.
pv:int: protection-value
returns
vms.ssdef.SS__CREATED: one or more directories created
vms.ssdef.SS__NORMAL: all the specified directories already exist
Some other error. See in vms.ssdef

date_time()->list

Gets current date and time.

parameters
None
returns
The list:
  • int: status code of the operation
  • str: resulting string

get_ef()->list

Allocates the local event flag.

parameters
None
returns
The list:
  • int: status code of the operation
  • int: resulting event flag

free_ef(ef:int)->int

Releases the local event flag.

parameters
ef:int: local event flag
returns
Status code of the operation

put_common(common:str)->int

Copies a string into the common area.

parameters
common:str: string to copy
returns
Status code of the operation

get_common()->list

Gets the string from the common area.

parameters
None
returns
The list:
  • int: status code of the operation
  • str: resulting string

get_hostname(flags:int)->list

Gets the host name of the local system.

parameters
flags:int if set to 1, the host node name is returned in a parseable format
returns
The list:
  • int: status code of the operation
  • str: resulting host node name

getjpi(item_code:int, pid:int, pname:str)->list

Gets the specified job/process information as a string.

parameters
item_code:int: item identifier code defining the item of the information to be returned. See vms.jpidef
pid:int: process ID
pname:str: process name

For valid combination of the values of pid and pname, see the OpenVMS RTL Library (LIB$) Manual for LIB$GETJPI. The resulting pid is not returned.

returns
The list:
  • int: status code of the operation
  • str: resulting string

getsyi(item_code:int, node_name:str)->list

Gets system-wide information as a string.

parameters
item_code:int: item identifier code defining the item of the information to be returned. See vms.syidef
node_name:str: node name
returns
The list:
  • int: status code of the operation
  • str: resulting string
  • int: resulting cluster system ID

spawn(command:str, input_file:str, output_file:str, flags:int, pname:str)->list

Requests the command language interpreter (CLI) of the calling process to spawn a subprocess for executing CLI commands.

parameters
command:str: command to execute
input_file:str: equivalence name to be associated with the logical name SYS$INPUT
output_file:str: equivalence name to be associated with the logical name SYS$OUTPUT
flags:int: flag bits that designate optional behavior. See vms.clidef
pname:str: name defined for the subprocess
returns
The list:
  • int: status code of the operation
  • int: process ID of the spawned process

do_command(command:str)->None

Stops program execution and directs the command language interpreter (CLI) to execute a command that is supplied as the argument.

parameters
command:str: command to execute
returns
If successful, it does not return control to the calling program.

vms.sys


Wraps the OpenVMS System Services functions.


asctim(vms_time:int, time_only:int)->list

Converts an absolute or delta time from 64-bit system time format to an ASCII string.

parameters
vms_time:int: OpenVMS system time. A negative time value represents a delta time.
time_only:int: if set to 1, asctim returns the hour only.
returns
The list:
  • int: status code of the operation
  • str: resulting string

bintim(time_str:str)->list

Converts an ASCII string to an absolute or delta time value in the system 64-bit time format.

parameters
time_str:str in the following format:
  • Absolute Time: dd-mmm-yyyy hh:mm:ss.cc
  • Delta Time: dddd hh:mm:ss.cc
returns
The list:
  • int: status code of the operation
  • int: resulting time value

asctoid(name:str)->list

Translates the specified identifier name into its binary identifier value.

parameters
name:str: identifier name
returns
The list:
  • int: status code of the operation
  • int: resulting identifier value
  • int: resulting identifier attributes. See vms.kgbdef

idtoasc(id_val:int, context:int)->list

Translates the specified identifier value to the identifier name.

parameters
id_val:int: identifier value. See OpenVMS System Services Reference Manual for SYS$IDTOASC
context:int: context value used when idtoasc is called repeatedly. Must be initialized with the value 0.
returns
The list:
  • int: status code of the operation
  • str: resulting identifier name
  • int: resulting identifier value
  • int: resulting identifier attributes. See vms.kgbdef
  • int: resulting context

crembx(tmp:int, maxmsg:int, bufquo:int, promsk:int, acmode:int, mbx_name:string, flags:int)->list

Creates a virtual mailbox device.

parameters
tmp:int: the first bit specifies a permanent mailbox
maxmsg:int: maximum size of a message (in bytes)
bufquo:int: number of bytes of system dynamic memory that can be used to buffer messages sent to the mailbox
promsk:int: protection mask to be associated with the created mailbox
acmode:int: access mode to be associated with the channel to which the mailbox is assigned
mbx_name:string: logical name to be assigned to the mailbox
flags:int: options for the assign operation. See vms.cmbdef
returns
The list:
  • int: status code of the operation
  • int: resulting channel

delmbx(channel:int)->int

Marks a permanent mailbox for deletion.

parameters
channel:int: mailbox channel
returns
Status code

assign(devnam:str, acmode:int, mbxnam:str, flags:int)->list

Provides a process with an I/O channel.

parameters
devnam:str: name of the device
acmode:int: access mode to be associated with the channel
mbxnam:str: logical name of the mailbox to be associated with the device
flags:int: an optional device-specific argument
returns
The list:
  • int: status code of the operation
  • int: resulting channel

dassgn(channel:int)->int

Unassigns (releases) an I/O channel.

parameters
channel:int: number of the I/O channel to be unassigned
returns
Status code

readvblk(channel:int, max_read:int, block:int, fmod:int)->list

Read from the I/O channel.

parameters
channel:int: I/O channel
max_read:int: amount of bytes to read
block:int: starting block
fmod:int: function code modifiers
returns
The list:
  • int: status code of the operation
  • byte: resulting buffer
  • int: I/O completion code

writevblk(channel:int, buffer:bytes, block:int, fmod:int)->list

Write to the I/O channel.

parameters
channel:int: I/O channel
buffer:bytes: bytes to write
block:int: starting block
fmod:int: function code modifiers
returns
The list:
  • int: status code of the operation
  • int: amount of written bytes
  • int: I/O completion code

cancel(channel:int)->int

Cancel the I/O operation.

parameters
channel:int: I/O channel
returns
Status code

crelnm(attr:int, tabnam:str, lognam:str, acmode:int, il:object)->int

Creates a logical name and specifies its equivalence names.

parameters
attr:int: attributes to be associated with the logical name. See vms.lnmdef
tabnam:str: name of the table in which to create the logical name
lognam:str: logical name to be created
acmode:int: access mode to be associated with the logical name. See vms.psldef
il:object: item list, created via vms.ile3.new()

See OpenVMS System Services Reference Manual for SYS$CRELNM.

returns
Status code

trnlnm(attr:int, tabnam:str, lognam:str, acmode:int, il:object)->int

Returns information about the specified logical name.

parameters
attr:int: attributes controlling the search for the logical name. See vms.lnmdef
tabnam:str: name of the logical name table or the name of a searchlist logical name
lognam:str: logical name for which information is to be returned
acmode:int: access mode to be used in the translation. See vms.psldef
il:object: item list, created via vms.ile3.new()

See OpenVMS System Services Reference Manual for SYS$TRNLNM.

returns
Status code

dellnm(tabnam:str, lognam:str, acmode:int)->int

Deletes all logical names with the specified name.

parameters
tabnam:str: name of a logical name table or the name of a searchlist logical name
lognam:str: logical name to be deleted
acmode:int: access mode to be used in the delete operation. See vms.psldef
returns
Status code

device_scan(search_devnam:str, item_list:object, context:int)->list

Returns the names of all devices that match a specified set of search criteria.

parameters
search_devnam:str: name of the device for which device_scan to search
item_list:object: item list specifying search criteria
context:int: value used to indicate the current position of the search. On the initial call it must contain 0.

See OpenVMS System Services Reference Manual for SYS$DEVICE_SCAN

returns
The list:
  • int: status code of the operation
  • str: found device name
  • int: context

uicstr(uic:int, flags:int)->list

Converts UIC to a string.

parameters
uic:int: UIC
flags:int
  • 0: use "!%I" SYS$FAO format
  • 1: use "!%U" SYS$FAO format
returns
The list:
  • int: status code of the operation
  • str: UIC string

getdvi(dev_nam:str, item_list:object)->int

Returns information related to the primary and secondary device characteristics of an I/O device.

parameters
dev_nam:str: the name of the device for which information is to be returned
item_list:object: item list specifying which information about the device is to be returned

See OpenVMS System Services Reference Manual for SYS$GETDVI

returns
Status code

getjpi(pid:int, pnam:str, item_list:object)->list

Returns information about one or more processes of the system or across the OpenVMS Cluster system.

parameters
pid:int: process identification
pnam:str: name of the process
item_list:object: item list specifying which information about the process or processes is to be returned

See OpenVMS System Services Reference Manual for SYS$GETJPI

returns
The list:
  • int: status code of the operation
  • int: process ID

getlki(lki:int, item_list:object)->list

Returns information about the lock database on a system.

parameters
lki:int: identification of the lock (lock ID) information about which needs to be returned
item_list:object: item list specifying the lock information to be returned

See OpenVMS System Services Reference Manual for SYS$GETLKI

returns
The list:
  • int: status code of the operation
  • int: lock identification

getmsg(msgid:int, flags:int)->list

Returns message text associated with a given message identification code.

parameters
msgid:int: identification of the message to be retrieved
flags:int: message components to be returned

See OpenVMS System Services Reference Manual for SYS$GETMSG

returns
The list:
  • int: status code of the operation
  • str: message string
  • int: optional information

getqui(func:int, context:int, item_list:object)->list

Returns information about queues and the jobs initiated from these queues.

parameters
func:int: function code specifying the function that getqui is to perform. See vms.quidef
context:int: context stream for this call
item_list:object: item list supplying the information to be used by the function

See OpenVMS System Services Reference Manual for SYS$GETQUI

returns
The list:
  • int: status code of the operation
  • int: context

getrmi(item_list:object)->int

Returns system performance information about the local system.

parameters
item_list:object: item list specifying which information about the local node is to be returned

See OpenVMS System Services Reference Manual for SYS$GETRMI

returns
Status code

getsyi(csid:int, node_name:str, item_list:object)->list

Returns information about the local system or about other systems in an OpenVMS Cluster system.

parameters
csid:int: OpenVMS Cluster system identification
node_name:str: name of the node about which information is to be returned
item_list:object: item list specifying which information about the node or nodes to return

See OpenVMS System Services Reference Manual for SYS$GETSYI

returns
The list:
  • int: status code of the operation
  • int: CSID

gettim()->list

Returns the current system time in a 64-bit format.

parameters
None
returns
The list:
  • int: status code of the operation
  • int: current system time

getuai(user_name:str, item_list:object)->int

Returns authorization information about the specified user.

parameters
user_name:str: name of the user to get authorization information for
item_list:object: item list specifying which information to return

See OpenVMS System Services Reference Manual for SYS$GETUAI

returns
Status code

hiber()->int

Allows a process to make itself inactive but to remain known to the system so that it can be interrupted.

parameters
None
returns
Status code

schdwk(pid:int, pname:str, time:int, reptim:int)->list

Schedules the awakening (restart) of a process that has placed itself in the state of hibernation with the Hibernate service.

parameters
pid:int: process identification (PID) of the process to be awakened
pname:str: name of the process to be awakened
time:int: time at which the process is to be awakened
reptim:int: time interval at which the wakeup request is to be repeated

See OpenVMS System Services Reference Manual for SYS$SCHDWK

returns
The list:
  • int: status code of the operation
  • int: PID

add_holder(id:int, holder:int, attrib:int)->int

Adds the specified holder record to the target identifier.

parameters
id:int: target identifier granted to the specified holder
holder:int: holder identifier that is granted access to the target identifier
attrib:int: attributes to be placed in the holder record

See OpenVMS System Services Reference Manual for SYS$ADD_HOLDER

returns
Status code

add_ident(name:str, id:int, attrib:int)->list

Adds the specified identifier to the rights database.

parameters
name:str: identifier name to be added to the rights database
id:int: identifier to be created
attrib:int: attributes placed in the identifier’s record

See OpenVMS System Services Reference Manual for SYS$ADD_IDENT

returns
The list:
  • int: status code of the operation
  • int resid: identifier value assigned by the system

find_held(holder:int, context:int)->list

Returns the identifiers held by the specified holder.

parameters
holder:int: holder whose identifiers to be found
context:int: context value used when find_held is called repeatedly

See OpenVMS System Services Reference Manual for SYS$FIND_HELD

returns
The list:
  • int: status code of the operation
  • int id: identifier value that was found
  • int attrib: attributes associated with the holder returned in id
  • int context

finish_rdb(context:int)->int

Deallocates the record stream and clears the context value.

parameters
context:int: context value to be cleared
returns
Status code

forcex(pid:int, pname:str, code:int)->int

Causes an Exit ($EXIT) service call to be issued on behalf of a specified process.

parameters
pid:int: process identification (PID) of the process to force exit
pname:str: process name of the process that is to force exit
code:int: completion code value to be used as the exit parameter
returns
Status code

rem_holder(id:int, holder:int)->int

Deletes the specified holder record from the target identifier’s list of holders.

parameters
id:int: binary value of the target identifier
holder:int: identifier of the holder being deleted
returns
Status code

rem_ident(id:int)->int

Removes the specified identifier record and all its holder records (if any) from the rights database.

parameters
id:int: binary value of the identifier deleted from rights database
returns
Status code

setuai(user_name:str, item_list:object)->int

Modifies the user authorization file (UAF) record for the specified user.

parameters
user_name:str: name of the user whose UAF record is modified
item_list:object: item list specifying which information from the specified UAF record is to be modified

See OpenVMS System Services Reference Manual for SYS$SETUAI

returns
Status code

show_intrusion(user_criteria:str, flags:int, context:int)->list

Searches for and returns information about records in the intrusion database matching the caller specifications.

parameters
user_criteria:str: description of an intruder or suspect
flags:int: type of records in the intrusion database about which information is to be returned. NOTE: do not use vms.ciadef.CIA_M_ITEMLIST, because user_criteria is a string
context:int: context information to keep between related calls

See OpenVMS System Services Reference Manual for SYS$SETUAI

returns
The list:
  • int: status code of the operation
  • str intruder: user specification of the matched intruder or suspect record in the intrusion database
  • int expires: quadword time format indicating the time when the record will expire
  • int type: the types of the matched record and the status of the suspect
  • int count: number of login failures or break-in attempts

rdb


Wraps the Oracle Rdb functions.


Attach(dbname:string)->int

Attaches to the specified database. The string may specify the full path to the Rdb database in the OpenVMS format or (more commonly) a logical name pointing to the database.

parameters
dbname:string: path or logical name
returns
Status code:
  • 0: success
  • -1: failed

CloseCursor(cursor:object)->int

Closes the specified cursor.

parameters
cursor:object: cursor
returns
Status code:
  • 0: success
  • -1: failed

Commit()->int

Commits the current database transaction.

parameters
None
returns
Status code:
  • 0: success
  • -1: failed

Data(cursor:object, idx:int)->str

Given a cursor handle and column index (integer), returns the data value for the specified column for the last fetch operation.

parameters
cursor:object: cursor
idx:int: index
returns
Resulting string

DeclareCursor(name:str, statement:str)->object

Declares a cursor. Inputs are the name for the cursor and the SQL statement. On success the function returns a cursor handle that can be used with OpenCursor(), FetchCursor(), and CloseCursor().

parameters
name:str: name for the cursor
statement:str: SQL statement
returns
Resulting cursor

Detach()->int

Disconnects from the database.

parameters

None

returns
Status code:
  • 0: success
  • -1: failed

Error()->str

Returns a description of the last error.

parameters
None
returns
Resulting error string

Exec(sh:object)->int

Executes a previously prepared SQL statement.

parameters
sh:object: prepared SQL statement
returns
Status code:
  • 0: success
  • -1: failed

ExecI(st:str)->int

Executes the supplied SQL statement immediately.

   Note: the last letter is a capital 'i'
parameters
st:str: SQL statement
returns
Status code:
  • 0: success
  • -1: failed

Fetch(cursor:object)->int

Fetches a row of data for the specified cursor but does not explicitly return the fetched data. The Data() method can then be used to retrieve individual data values for each column (Ncol() can be used to determine the number of columns).

parameters
cursor:object: cursor
returns
Status code:
  • 1: success
  • 0: success, end of stream
  • -1: failed

FetchRow(cursor:object)->list

Fetches a row of data using the specified cursor handle. The fetched data is returned as a list of strings.

parameters
cursor:object: cursor
returns
The list of strings

Free(cursor:object)->int

Frees resources associated with the supplied cursor handle for a cursor previously declared via DeclareCursor().

parameters
cursor:object: cursor
returns
Status code:
  • 0: success

Ncol(cursor:object)->int

Returns the number of columns (values) that would be returned by a fetch for the specified cursor.

parameters
cursor:object: cursor
returns
Number of columns

OpenCursor(cursor:object)->int

Opens a cursor using the supplied (previously declared) cursor handle.

parameters
cursor:object: cursor
returns
Status code:
  • 0: success
  • -1: failed

Prepare(st:string)->object

Prepares an SQL statement and returns a handle for the prepared statement that can be used in subsequent calls to Exec().

parameters
st:string: SQL statement
returns
Resulting prepared statement

Rollback()->int

Rolls back the current database transaction.

parameters
None
returns
Status code:
  • 0: success
  • -1: failed

SetReadonly()->int

Starts a read-only transaction.

parameters
None
returns
Status code:
  • 0: success
  • -1: failed

Sqlcode()->int

Returns the SQLCODE for the last database operation.

parameters
None
returns
Resulting SQL code

RMS


Working with RMS.

It should be noted that the RMS module is intended for use with indexed RMS files only.


BCD2String(bcd:bytes, prec:int)->str

Converts BCD to string.

parameters
bcd:bytes: BCD
prec:int: precision
returns
str: BCD number as a string

String2BCD(repr:str, l:int, prec:int)->bytes

Converts string to BCD.

parameters
repr:str: string representation of the BCD number
l:int: length
prec:int: precision
returns
bytes: BCD from string

BCD2Tuple(bcd:bytes, prec:int)->tuple

Converts BCD to tuple: (sign, (digits,), precision).

parameters
bcd:bytes: BCD
prec:int: precision
returns
tuple: BCD parsed to a tuple

Tuple2BCD(repr:tuple, l:int, prec:int)->bytes

Converts tuple to BCD.

parameters
repr:tuple: tuple representation of the BCD number
l:int: length
prec:int: precision
returns
bytes: BCD from tuple

getrmsattr(path:str, attr:int)->int

Gets an RMS attribute.

parameters
path:str: VMS path to the file
attr:int: attribute to retrieve
returns
attr:int: attribute value

parse(path:str)->tuple

Parses the VMS path to a tuple of bytes: (node, disk, directory, name, extension, version)

parameters
path:str: VMS path to the file
returns
tuple: parsed path

file(name:str, fac:int, shr:int, fop:int)->rmsFile

Opens a file

parameters
path:str: VMS path to the file
fac:int: file access
shr:int: sharing options
fop:int: file processing options
returns
file:rmsFile: rmsFile object

RMS file object

Members

longname

Full path to the file

nok

Number of keys

org

File organization


Methods

close

close() -> status
Closes file.


delete

delete([key]) -> status
Deletes the current record or the first record with the given key.


fetch

fetch([key]) -> status, record
Retrieves the record from a file.


find

find([key]) -> status
Locates the specified record and establishes it as the current record.


flush

flush() -> status
Writes out all modified I/O buffers and file attributes associated with the file.


free

free() -> status
Unlocks all records that were previously locked for the record stream.


put

put(record) -> status
Inserts a record into a file.


release

release() -> status
Unlocks the record.


rewind

rewind([keynum]) -> status
Sets the context of a record stream to the first record in the file.


update

update(record) -> status
Allows to modify the contents of an existing record in a file residing on a disk device.


usekey

usekey([keynum]) -> status
Specifies the key or index to which the operation applies.


setrop

setrop(rop) -> status
Specifies which of the various optional record operations are to be implemented for the program.


See also